HK-tyyppiset rullaketjut

Downsizing Your Method with Higher Electrical power Chains
HK kind roller chains conform to H type of ANSI, and their thickness of inner and outer website link plates are equal to those in the next larger dimension chain. For that reason, HK type roller chains are greater in tensile power by about 20%and in maximum allowable load by about 15% than individuals of conventional roller chains. Because the fat from the chains is also larger, HK style roller chains are suitable for the application of hefty duty at low pace.
Advisable makes use of
?Optimum for destinations where larger power is needed but significant and heavier chains are unable to be employed.
Ketjujen kokoelma
Select a appropriate HK form roller chain based upon “Low-speed selection”
To the maximum allowable load, see the following table of dimensions.
HK kind roller chains are available up to triplex.
Rattaat
Use standard sprockets for any simplex HK roller chain Since the transverse pitches are greater than people of conventional chains within the case of duplex or triplex, normal sprockets cannot be utilised. Refer to your sprocket tooth profiles for HK
Connecting website link and offset hyperlink
The tensile strength of connecting links and offset backlinks are listed on the left, but the highest allowable load is reduced than that of the base chain. Please seek the advice of us should you have got any concerns. It can be encouraged to make use of the connecting website link of interference-fitted (FJ, HJ)
By no means make the holes of the connecting plate larger and never ever make the pins thinner to facilitate the work for fitting the pins in to the connecting plate, because otherwise the fatigue power is going to be lowered.
Erilaisia ​​ketjuja
Choose a good HK form roller chain determined by “Low-speed selection”
For that maximum allowable load, see the following table of dimensions.
HK style roller chains can be found as much as triplex.
Rattaat
Use regular sprockets for a simplex HK roller chain Because the transverse pitches are more substantial than these of typical chains during the case of duplex or triplex, conventional sprockets can not be utilised. Refer on the sprocket tooth profiles for HK
Connecting hyperlink and offset website link
The tensile strength of connecting hyperlinks and offset hyperlinks are listed over the left, but the maximum allowable load is reduced than that on the base chain. Please check with us need to you have got any concerns. It is encouraged to utilize the connecting hyperlink of interference-fitted (FJ, HJ)
Hardly ever make the holes in the connecting plate greater and under no circumstances make the pins thinner to facilitate the get the job done for fitting the pins in to the connecting plate, due to the fact otherwise the fatigue strength will probably be lowered.

Tunnisteet: